Deals For Hiro H50188 ADSL2+ Modem and Wireless Router

Hiro H50188 ADSL2+ Modem and Wireless Router

By

SpecificationsMfr Part Number: H50188, FeaturesIP Alias, User Datagram Protocol (UDP), Transmission Control Protocol (TCP), Internet Control Message Protocol (ICMP), Internet Group Management Protocol (IGMP), PPP over PAP (RFC1334), PPP over CHAP (RFC1994), MIB II support (RFC1213), Transparent bridging as specified in IEEE 802.1D, NAT (Network Address Translation), Dynamic Host Configuration Protocol (DHCP), Dynamic DNS support, Routing Information Protocol (RIP) v1 and v2, ADSL Compliance Full-rate ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) Annex A or B, Splitterless ITU G.992.2 (G.lite) specification, ITU G.994.1 (G.hs), ITU G.992.3 (G.dmt. bis / ADSL2), ITU G.992.5 (ADSL2plus) ,Supports splitterless ADSL implementation, Supports Dying Gasp s, ATM Subsystem PPP over ATM (RFC 2364), Bridged IP over ATM (RFC 1483), PPP over Ethernet (RFC 2516), Multiprotocol Encapsulation over AAL5 (RFC 2684), Supports up to 8 Virtual Channel Connections (VCCs), Supports UBR, CBR, and VBR service classes, ATM Forum UNI 3.1 / 4.0 PVC, Support OAM F4/F5 look-back, AIS and RDI OAM cells, Management TFTP client and server, DHCP client and server, FTP server and client, Universal Plug and Play (UPnP) support, Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP, Update of boot image or configuration data via TFTP / FTP, Syslog, Built-in Diagnostic Tools, SNMP MIB support, Wireless 802.11gCompliant 802.11g and 802.11b, 2.4 GHz i ½ 2.48GHz frequency range, Supports 64 / 128 bits WEP and WPA, 54 Mbps wireless operation rate, Supports Quality of Service (QoS) i ½ 802.11e, Ethernet Interface IEEE 802.3, 10/100 Mbps, Ethernet interface supporting up to 64 LAN hosts, Weight: 4 lb

Hiro H50188 ADSL2+ Modem and Wireless Router